ASTM (American Society for Testing and Material)
역사와 특성 : 재료의 용도별, Test별 규격화를 통해 재료의 품질을 향상시키고 Maker와 User로 하여금 보다 손쉬운 재료의 선정과 취급을 유도하기 위한 목적으로 1898년에 설립.1995년 현재 132개의 위원회에서 매년 9500여개의 신규 Standard가 발행 또는 개정되고 있다.
idea behind the sonic resonance test method can be explained using the equation by which one can measure the propagating speed of flexural sonic wave through a medium
(1)
where v is the propagating speed of the flexural wave on a string, F is the tension applied to both sides of the string, P is the mass per unit length of the string.
Some methmatical manipulation of Eq (1) yields
flexure sensitivity (force or elasticity that bear in external force that nod some quality of the material or is curve . = bending strength) is lacking.
Iron frame concrete method of construction is making thereby.
Advantage of RC (Reinforced Concrete) structure is as following.
1) high economic performance
2) because resources expense is inexpensive than steel-frame structure) corrosion
Ⅰ. 개요
운동을 일으키는 힘(force)를 대상으로 하는 운동역학이다. 인체 관절이 빠르게 그리고 오랜 시간 동안 기동력을 유지하려면, 관절의 디자인과 윤활이 매우 중요하다. 관절은 큰 하중을 이겨낼 수 있고, 느린 회전속도와 매우 낮은 마찰계수를 가지고 있다. 관절의 질병과 손상으로 인해 윤활기
관절이란 인체의 2개 이상의 뼈가 만나는 곳에 있는 특별한 구조로 된 것이다. 관절은 뼈와 뼈 사이에서 부드럽게 움직이게 하는 일을 하며, 외력이나 압박에 견디는 쿠션과 같은 역할도 수행한다. 관절이 굳어진 상태를 구축이라 하며 이것은 오랜 시간동안의 고정, 부적절한 자세, 강직 등으로 인해 근
빛이 시신경을 따라가고 시신경로를 지나 대부분은 외슬상체(lateral geniculate body)를 거쳐 시각중추에 도달하나 일부는 직접 Edinger-Westphal 핵으로 간다. 여기서 부교감요소(parasympathetic component)가 나와 동안신경의 체운동성 요소(somatic motor component)와 같이 주행하여 결국 모양신경절(ciliary ganglion)로 들어가
flexural stress), 굴곡 탄성률(flexural modulus)을 구해보고, 각각의 기계적 물성 값으로 나타내질 수 있는 재료의 고유한 특성에 대해 알아보고자 한다.
2. 서 론
만능실험기(Universal Testing Machine, 이하 UTM)는 물질에 응력(변형력, stress)을 가하여 이에 따른 변형도(변형률, strain)를 측정하는 기기이다. 종종 Ma
testing. It stated that irradiation up to 10 kGy introduces no special nutritional or microbiological problems in foods. In September 1997 a Study Group was jointly convened by the WHO, FAO and IAEA to evaluate the wholesomeness of food irradiated with doses above 10 kGy. This Study Group concluded that there is no scientific basis for limiting absorbed doses to the upper level of 10 kGy as curre
※토의 사항 및 문제
1. 본 실험에서 발생하는 오차의 원인들을 설명 하시오.
세라믹 시편을 소결하는 과정에서 내부 기공이 발생 하여 시험을 시작 하기 전에 이미 약간의 파괴가 일어 날 가능성, 시편을 제작하는 과정에서 불순물이 첨가되어 강도가 약해질 가능성, 시편 표면이 수분과 반응하여 크
testing machine): 인장강도를 측정하는 기구
-Load cell : 무게를 숫자로 표시하는 전자저울에 필수적인 무게측정 소자로서 무게를 받으면 압축되거나 늘어나는 등, 변형이 되는데, 이 변형량을 변형측정장치가 전기 신호로 검출한 뒤 컴퓨터 장치에 의해 디지털 신호로 바꾸면 무게가 숫자로 나타난다.